Site Logo
Site Logo
 
It is currently Mon Mar 27, 2017 11:12 am

All times are UTC




Forum locked This topic is locked, you cannot edit posts or make further replies.  [ 22 posts ]  Go to page 1, 2  Next
Author Message
 Post subject: Tool list in post
PostPosted: Sat Jun 29, 2013 8:18 pm 
Offline

Joined: Thu Jun 20, 2013 7:02 pm
Posts: 120
Location: Houston Tx
Can anyone tell me how to modify the post to have a tool list at the top of mill programs
Thanks in advance

_________________
CHOCOLATE? This is doo doo baby!


Top
 Profile  
 
 Post subject: Re: Tool list in post
PostPosted: Sat Jun 29, 2013 11:20 pm 
Offline

Joined: Tue Jun 12, 2007 10:25 pm
Posts: 23
Location: Savannah GA
This is in the addin section
http://www.featurecam.com/addins/index.asp


Top
 Profile  
 
 Post subject: Re: Tool list in post
PostPosted: Tue Jul 02, 2013 11:53 pm 
Offline

Joined: Thu Jan 18, 2007 6:24 am
Posts: 358
Location: CT
And once you have the addin installed, here is a copy of my "Program Start" segment of the VF4 post.

%<EOB>
O<MCSID><EOB>
(SETUP-INFO)<EOB>
( POSTING DATE: <DATE>)<EOB>
(TOOL-LIST) <EOB>
( VF4 BY FEATURECAM )<EOB>
{N<SEQ> }G00 G53 Z0 <EOB>
{N<SEQ> }G90 G17 G<FIXTURE> G80 G94 G49 G40 <EOB>
( OP: {<OP-PASS> }<OP-TYPE> <SEGM-ID> )<EOB>
( TOOL<TOOL> = <TOOL-DIAM> DIA <TOOL-NAME> )<EOB><EOB>
{N<SEQ> }T<TOOL> M6 <EOB>
[:FSTTOOL=<TOOL>]
{N<SEQ> }G00 G43 H<TOOL> D<OFFSET#><EOB>
{N<SEQ> }<MOTION> X<X-COORD> Y<Y-COORD> Z<Z-COORD> <EOB>
<IF>[eq(<P3>,"")]<THEN>
{N<SEQ> }S<SPEED> <SPINDLE><EOB>
{N<SEQ> }<COOLANT> <EOB>
<ELSE>
{N<SEQ>} S<SPEED> M42 <EOB>
{N<SEQ>} <SPINDLE> <EOB>
{N<SEQ>} <COOLANT> <EOB>
<ENDIF>


Top
 Profile  
 
 Post subject: Re: Tool list in post
PostPosted: Wed Jul 03, 2013 12:00 am 
Offline

Joined: Thu Jun 20, 2013 7:02 pm
Posts: 120
Location: Houston Tx
Okay but how do I Install it


SEYMOURDUMORE wrote:
And once you have the addin installed, here is a copy of my "Program Start" segment of the VF4 post.

%<EOB>
O<MCSID><EOB>
(SETUP-INFO)<EOB>
( POSTING DATE: <DATE>)<EOB>
(TOOL-LIST) <EOB>
( VF4 BY FEATURECAM )<EOB>
{N<SEQ> }G00 G53 Z0 <EOB>
{N<SEQ> }G90 G17 G<FIXTURE> G80 G94 G49 G40 <EOB>
( OP: {<OP-PASS> }<OP-TYPE> <SEGM-ID> )<EOB>
( TOOL<TOOL> = <TOOL-DIAM> DIA <TOOL-NAME> )<EOB><EOB>
{N<SEQ> }T<TOOL> M6 <EOB>
[:FSTTOOL=<TOOL>]
{N<SEQ> }G00 G43 H<TOOL> D<OFFSET#><EOB>
{N<SEQ> }<MOTION> X<X-COORD> Y<Y-COORD> Z<Z-COORD> <EOB>
<IF>[eq(<P3>,"")]<THEN>
{N<SEQ> }S<SPEED> <SPINDLE><EOB>
{N<SEQ> }<COOLANT> <EOB>
<ELSE>
{N<SEQ>} S<SPEED> M42 <EOB>
{N<SEQ>} <SPINDLE> <EOB>
{N<SEQ>} <COOLANT> <EOB>
<ENDIF>

_________________
CHOCOLATE? This is doo doo baby!


Top
 Profile  
 
 Post subject: Re: Tool list in post
PostPosted: Wed Jul 03, 2013 11:56 am 
Offline

Joined: Thu Jun 20, 2013 7:02 pm
Posts: 120
Location: Houston Tx
well i have it installed in my addins, its box is checked but no tool list at the top of my programs yet

any ideas?

_________________
CHOCOLATE? This is doo doo baby!


Top
 Profile  
 
 Post subject: Re: Tool list in post
PostPosted: Wed Jul 03, 2013 12:22 pm 
Offline

Joined: Wed Jan 17, 2007 7:14 pm
Posts: 60
Location: Tulsa,Ok.
Do you have the bold part of Seymour's response>>> (TOOL-LIST) <EOB> in your post processor?


Top
 Profile  
 
 Post subject: Re: Tool list in post
PostPosted: Wed Jul 03, 2013 12:29 pm 
Offline

Joined: Thu Jun 20, 2013 7:02 pm
Posts: 120
Location: Houston Tx
no
no one said anything like that just download the addin

_________________
CHOCOLATE? This is doo doo baby!


Top
 Profile  
 
 Post subject: Re: Tool list in post
PostPosted: Wed Jul 03, 2013 12:37 pm 
Offline

Joined: Thu Jun 20, 2013 7:02 pm
Posts: 120
Location: Houston Tx
But that did it

thanks a ton guys

_________________
CHOCOLATE? This is doo doo baby!


Top
 Profile  
 
 Post subject: Re: Tool list in post
PostPosted: Wed Jul 03, 2013 2:30 pm 
Offline

Joined: Thu Jun 20, 2013 7:02 pm
Posts: 120
Location: Houston Tx
1 more question on posts

Is there a addin to put a n block at each tool operation

N1
T1M6

Like that

If there isnt how could I add it to the post manually

_________________
CHOCOLATE? This is doo doo baby!


Top
 Profile  
 
 Post subject: Re: Tool list in post
PostPosted: Wed Jul 03, 2013 3:05 pm 
Offline

Joined: Fri Sep 16, 2011 5:48 pm
Posts: 98
Location: S.F. Bay Area
{N<SEQ>}

then in the post dialog ( under manufacturing ) set the block start and increment values


Top
 Profile  
 
 Post subject: Re: Tool list in post
PostPosted: Wed Jul 03, 2013 3:22 pm 
Offline

Joined: Thu Jun 20, 2013 7:02 pm
Posts: 120
Location: Houston Tx
vf1kf wrote:
{N<SEQ>}

then in the post dialog ( under manufacturing ) set the block start and increment values



great

_________________
CHOCOLATE? This is doo doo baby!


Top
 Profile  
 
 Post subject: Re: Tool list in post
PostPosted: Wed Jul 03, 2013 4:12 pm 
Offline

Joined: Thu Jun 20, 2013 7:02 pm
Posts: 120
Location: Houston Tx
vf1kf wrote:
{N<SEQ>}

then in the post dialog ( under manufacturing ) set the block start and increment values


Almost got it where i like i did as you said
but take a look at its increments i dont know why its doing that


%
O0100
()
( T1 = 2.344 DR )
( T2 = 2.38 DIA BORING HEAD )
( T3 = CENTER_5 )
( T4 = TD_01990_8:J )
( T5 = TAP1|4-20UNC:H5:SB )
( T6 = TD_16250_1_5|8:T:TN )
( T7 = 45 DEGREE CUTTER )
( T8 = TD_08750_7|8:T )
( T9 = .5 CARBIDE END MILL )
( T10 = CSINK90:1000 )
( T11 = TAP1-8UNC:SP )
()
N6 ()
( TOOL: T1 = 2.344 dia. 2.344 DR )
T1 M6
G00 G90 G54 X0. Y0.
S601 M03
G43 H1 Z1.0 M8
G00 X22.125 Y0.
G81 R-0.4 Z-5.05 F2.4
X20.7907 Y7.5672
X16.9487 Y14.2217
X11.0625 Y19.1608
X3.842 Y21.7889
X-3.842
X-11.0625 Y19.1608
X-16.9487 Y14.2217
X-20.7907 Y7.5672
X-22.125 Y0.
X-20.7907 Y-7.5672
X-16.9487 Y-14.2217
X-11.0625 Y-19.1608
X-3.842 Y-21.7889
X3.842
X11.0625 Y-19.1608
X16.9487 Y-14.2217
X20.7907 Y-7.5672
G80
G00 Z1.0
M09
G28 G49 G91 Y0.
G53 G90 Z0.
M01

N37 ()
( TOOL: T2 = 2.38 dia. 2.38 DIA BORING HEAD )
T2 M6
G00 G90 G54 X0. Y0.
S400 M03
X0 Y0
X22.125 Y0.
G43 H2 Z1.0 M8
G85 R-0.4 Z-5.05 F1.0
X20.7907 Y7.5672
X16.9487 Y14.2217
X11.0625 Y19.1608
X3.842 Y21.7889
X-3.842
X-11.0625 Y19.1608
X-16.9487 Y14.2217
X-20.7907 Y7.5672
X-22.125 Y0.
X-20.7907 Y-7.5672
X-16.9487 Y-14.2217
X-11.0625 Y-19.1608
X-3.842 Y-21.7889
X3.842
X11.0625 Y-19.1608
X16.9487 Y-14.2217
X20.7907 Y-7.5672
G80
G00 Z1.0
M09
G28 G49 G91 Y0.
G53 G90 Z0.
M01

N69 ()
( TOOL: T3 = 0.1875 dia. center_5 )
T3 M6
G00 G90 G54 X0. Y0.
S600 M03
X0 Y0
X14.315 Y0.
G43 H3 Z1.0 M8
G81 R-4.508 Z-4.8796 F5.0
X12.3972 Y7.1575
X7.1575 Y12.3972
X0. Y14.315
X-7.1575 Y12.3972
X-12.3972 Y7.1575
X-14.315 Y0.
X-12.3972 Y-7.1575
X-7.1575 Y-12.3972
X0. Y-14.315
X7.1575 Y-12.3972
X12.3972 Y-7.1575
G80
G00 Z1.0
M09
G28 G49 G91 Y0.
G53 G90 Z0.
M01

N95 ()
( TOOL: T4 = 0.199 dia. TD_01990_8:J )
T4 M6
G00 G90 G54 X0. Y0.
S959 M03
X0 Y0
X14.315 Y0.
G43 H4 Z1.0 M8
G83 R-4.508 Z-5.5478 Q0.199 F3.8
X12.3972 Y7.1575
X7.1575 Y12.3972
X0. Y14.315
X-7.1575 Y12.3972
X-12.3972 Y7.1575
X-14.315 Y0.
X-12.3972 Y-7.1575
X-7.1575 Y-12.3972
X0. Y-14.315
X7.1575 Y-12.3972
X12.3972 Y-7.1575
G80
G00 Z1.0
M09
G28 G49 G91 Y0.
G53 G90 Z0.
M01

N121 ()
( TOOL: T5 = 0.25 dia. tap1|4-20UNC:H5:SB )
T5 M6
G00 G90 G54 X0. Y0.
S100 M03
X0 Y0
X14.315 Y0.
G43 H5 Z1.0 M8
G84 R-4.508 Z-5.3255 F5.0
X12.3972 Y7.1575
X7.1575 Y12.3972
X0. Y14.315
X-7.1575 Y12.3972
X-12.3972 Y7.1575
X-14.315 Y0.
X-12.3972 Y-7.1575
X-7.1575 Y-12.3972
X0. Y-14.315
X7.1575 Y-12.3972
X12.3972 Y-7.1575
G80
G00 Z1.0
M09
G28 G49 G91 Y0.
G53 G90 Z0.
M01

N147 ()
( TOOL: T6 = 1.625 dia. TD_16250_1_5|8:T:TN )
T6 M6
G00 G90 G55 X0. Y0.
S1171 M03
X0 Y0
X15.8631 Y2.0884
G43 H6 Z1.0 M8
G81 R0.1 Z-3.3882 F4.7
X14.7821 Y6.1229
X12.6937 Y9.7402
X9.7402 Y12.6937
X6.1229 Y14.7821
X2.0884 Y15.8631
X-2.0884
X-6.1229 Y14.7821
X-9.7402 Y12.6937
X-12.6937 Y9.7402
X-14.7821 Y6.1229
X-15.8631 Y2.0884
Y-2.0884
X-14.7821 Y-6.1229
X-12.6937 Y-9.7402
X-9.7402 Y-12.6937
X-6.1229 Y-14.7821
X-2.0884 Y-15.8631
X2.0884
X6.1229 Y-14.7821
X9.7402 Y-12.6937
X12.6937 Y-9.7402
X14.7821 Y-6.1229
X15.8631 Y-2.0884
G80
G00 Z1.0
M09
G28 G49 G91 Y0.
G53 G90 Z0.
M01

N185 ()
( TOOL: T7 = 1.4 dia. 45 DEGREE CUTTER )
T7 M6
G00 G90 G55 X0. Y0.
S600 M03
X0 Y0
X15.5012 Y2.0408
G43 H7 Z1.0 M8
Z0.1
G01 Z-0.13 F2.5
X15.4921 Y1.933 F5.0
G03X15.5354 Y1.8338 I0.2171 J0.0358 F2.5
X15.5354 Y1.8338 I0.3277 J0.2546
X15.569 Y1.7956 I0.3277 J0.2546
X15.6619 Y1.7401 I0.1559 J0.1552
G01 X15.77 Y1.7355 F5.0
G00 Z1.0
X14.4449Y5.9833
Z0.1
G01 Z-0.13 F2.5
X14.4639 Y5.8767 F5.0
G03X14.5314 Y5.7922 I0.2004 J0.0908 F2.5
X14.5314 Y5.7922 I0.2507 J0.3307
X14.5738 Y5.764 I0.2507 J0.3307
X14.6778 Y5.7344 I0.1104 J0.1903
G01 X14.7835 Y5.7579 F5.0
G00 Z1.0
X12.4041Y9.518
Z0.1
G01 Z-0.13 F2.5
X12.45 Y9.42 F5.0
G03X12.5371 Y9.3558 I0.1701 J0.1396 F2.5
X12.5371 Y9.3558 I0.1565 J0.3844
X12.5854 Y9.3396 I0.1565 J0.3844
X12.6935 Y9.3379 I0.0574 J0.2124
G01 X12.7895 Y9.388 F5.0
G00 Z1.0
X9.518Y12.4041
Z0.1
G01 Z-0.13 F2.5
X9.5877 Y12.3214 F5.0
G03X9.6885 Y12.2819 I0.1282 J0.1788 F2.5
X9.6885 Y12.2819 I0.0517 J0.4118
X9.7393 Y12.2787 I0.0517 J0.4118
X9.8442 Y12.305 I0.0005 J0.22
G01 X9.9239 Y12.3782 F5.0
G00 Z1.0
X5.9833Y14.4449
Z0.1
G01 Z-0.13 F2.5
X6.072 Y14.383 F5.0
G03X6.1796 Y14.371 I0.0775 J0.2059 F2.5
X6.1796 Y14.371 I-0.0566 J0.4111
X6.2295 Y14.381 I-0.0566 J0.4111
X6.324 Y14.4336 I-0.0565 J0.2126
G01 X6.382 Y14.525 F5.0
G00 Z1.0
X2.0408Y15.5012
Z0.1
G01 Z-0.13 F2.5
X2.1425 Y15.4645 F5.0
G03X2.2495 Y15.4807 I0.0216 J0.2189 F2.5
X2.2495 Y15.4807 I-0.1611 J0.3825
X2.2951 Y15.5033 I-0.1611 J0.3825
X2.3728 Y15.5786 I-0.1096 J0.1908
G01 X2.4052 Y15.6818 F5.0
G00 Z1.0
X-2.0408Y15.5012
Z0.1
G01 Z-0.13 F2.5
X-1.933 Y15.4921 F5.0
G03X-1.8338 Y15.5354 I-0.0358 J0.2171 F2.5
X-1.8338 Y15.5354 I-0.2546 J0.3277
X-1.7956 Y15.569 I-0.2546 J0.3277
X-1.7401 Y15.6619 I-0.1552 J0.1559
G01 X-1.7355 Y15.77 F5.0
G00 Z1.0
X-5.9833Y14.4449
Z0.1
G01 Z-0.13 F2.5
X-5.8767 Y14.4639 F5.0
G03X-5.7922 Y14.5314 I-0.0908 J0.2004 F2.5
X-5.7922 Y14.5314 I-0.3307 J0.2507
X-5.764 Y14.5738 I-0.3307 J0.2507
X-5.7344 Y14.6778 I-0.1903 J0.1104
G01 X-5.7579 Y14.7835 F5.0
G00 Z1.0
X-9.518Y12.4041
Z0.1
G01 Z-0.13 F2.5
X-9.42 Y12.45 F5.0
G03X-9.3558 Y12.5371 I-0.1396 J0.1701 F2.5
X-9.3558 Y12.5371 I-0.3844 J0.1565
X-9.3396 Y12.5854 I-0.3844 J0.1565
X-9.3379 Y12.6935 I-0.2124 J0.0574
G01 X-9.388 Y12.7895 F5.0
G00 Z1.0
X-12.4041Y9.518
Z0.1
G01 Z-0.13 F2.5
X-12.3214 Y9.5877 F5.0
G03X-12.2819 Y9.6885 I-0.1788 J0.1282 F2.5
X-12.2819 Y9.6885 I-0.4118 J0.0517
X-12.2787 Y9.7393 I-0.4118 J0.0517
X-12.305 Y9.8442 I-0.22 J0.0005
G01 X-12.3782 Y9.9239 F5.0
G00 Z1.0
X-14.4449Y5.9833
Z0.1
G01 Z-0.13 F2.5
X-14.383 Y6.072 F5.0
G03X-14.371 Y6.1796 I-0.2059 J0.0775 F2.5
X-14.371 Y6.1796 I-0.4111 J-0.0566
X-14.381 Y6.2295 I-0.4111 J-0.0566
X-14.4336 Y6.324 I-0.2126 J-0.0565
G01 X-14.525 Y6.382 F5.0
G00 Z1.0
X-15.5012Y2.0408
Z0.1
G01 Z-0.13 F2.5
X-15.4645 Y2.1425 F5.0
G03X-15.4807 Y2.2495 I-0.2189 J0.0216 F2.5
X-15.4807 Y2.2495 I-0.3825 J-0.1611
X-15.5033 Y2.2951 I-0.3825 J-0.1611
X-15.5786 Y2.3728 I-0.1908 J-0.1096
G01 X-15.6818 Y2.4052 F5.0
G00 Z1.0
X-15.5012Y-2.0408
Z0.1
G01 Z-0.13 F2.5
X-15.4921 Y-1.933 F5.0
G03X-15.5354 Y-1.8338 I-0.2171 J-0.0358 F2.5
X-15.5354 Y-1.8338 I-0.3277 J-0.2546
X-15.569 Y-1.7956 I-0.3277 J-0.2546
X-15.6619 Y-1.7401 I-0.1559 J-0.1552
G01 X-15.77 Y-1.7355 F5.0
G00 Z1.0
X-14.4449Y-5.9833
Z0.1
G01 Z-0.13 F2.5
X-14.4639 Y-5.8767 F5.0
G03X-14.5314 Y-5.7922 I-0.2004 J-0.0908 F2.5
X-14.5314 Y-5.7922 I-0.2507 J-0.3307
X-14.5738 Y-5.764 I-0.2507 J-0.3307
X-14.6778 Y-5.7344 I-0.1104 J-0.1903
G01 X-14.7835 Y-5.7579 F5.0
G00 Z1.0
X-12.4041Y-9.518
Z0.1
G01 Z-0.13 F2.5
X-12.45 Y-9.42 F5.0
G03X-12.5371 Y-9.3558 I-0.1701 J-0.1396 F2.5
X-12.5371 Y-9.3558 I-0.1565 J-0.3844
X-12.5854 Y-9.3396 I-0.1565 J-0.3844
X-12.6935 Y-9.3379 I-0.0574 J-0.2124
G01 X-12.7895 Y-9.388 F5.0
G00 Z1.0
X-9.518Y-12.4041
Z0.1
G01 Z-0.13 F2.5
X-9.5877 Y-12.3214 F5.0
G03X-9.6885 Y-12.2819 I-0.1282 J-0.1788 F2.5
X-9.6885 Y-12.2819 I-0.0517 J-0.4118
X-9.7393 Y-12.2787 I-0.0517 J-0.4118
X-9.8442 Y-12.305 I-0.0005 J-0.22
G01 X-9.9239 Y-12.3782 F5.0
G00 Z1.0
X-5.9833Y-14.4449
Z0.1
G01 Z-0.13 F2.5
X-6.072 Y-14.383 F5.0
G03X-6.1796 Y-14.371 I-0.0775 J-0.2059 F2.5
X-6.1796 Y-14.371 I0.0566 J-0.4111
X-6.2295 Y-14.381 I0.0566 J-0.4111
X-6.324 Y-14.4336 I0.0565 J-0.2126
G01 X-6.382 Y-14.525 F5.0
G00 Z1.0
X-2.0408Y-15.5012
Z0.1
G01 Z-0.13 F2.5
X-2.1425 Y-15.4645 F5.0
G03X-2.2495 Y-15.4807 I-0.0216 J-0.2189 F2.5
X-2.2495 Y-15.4807 I0.1611 J-0.3825
X-2.2951 Y-15.5033 I0.1611 J-0.3825
X-2.3728 Y-15.5786 I0.1096 J-0.1908
G01 X-2.4052 Y-15.6818 F5.0
G00 Z1.0
X2.0408Y-15.5012
Z0.1
G01 Z-0.13 F2.5
X1.933 Y-15.4921 F5.0
G03X1.8338 Y-15.5354 I0.0358 J-0.2171 F2.5
X1.8338 Y-15.5354 I0.2546 J-0.3277
X1.7956 Y-15.569 I0.2546 J-0.3277
X1.7401 Y-15.6619 I0.1552 J-0.1559
G01 X1.7355 Y-15.77 F5.0
G00 Z1.0
X5.9833Y-14.4449
Z0.1
G01 Z-0.13 F2.5
X5.8767 Y-14.4639 F5.0
G03X5.7922 Y-14.5314 I0.0908 J-0.2004 F2.5
X5.7922 Y-14.5314 I0.3307 J-0.2507
X5.764 Y-14.5738 I0.3307 J-0.2507
X5.7344 Y-14.6778 I0.1903 J-0.1104
G01 X5.7579 Y-14.7835 F5.0
G00 Z1.0
X9.518Y-12.4041
Z0.1
G01 Z-0.13 F2.5
X9.42 Y-12.45 F5.0
G03X9.3558 Y-12.5371 I0.1396 J-0.1701 F2.5
X9.3558 Y-12.5371 I0.3844 J-0.1565
X9.3396 Y-12.5854 I0.3844 J-0.1565
X9.3379 Y-12.6935 I0.2124 J-0.0574
G01 X9.388 Y-12.7895 F5.0
G00 Z1.0
X12.4041Y-9.518
Z0.1
G01 Z-0.13 F2.5
X12.3214 Y-9.5877 F5.0
G03X12.2819 Y-9.6885 I0.1788 J-0.1282 F2.5
X12.2819 Y-9.6885 I0.4118 J-0.0517
X12.2787 Y-9.7393 I0.4118 J-0.0517
X12.305 Y-9.8442 I0.22 J-0.0005
G01 X12.3782 Y-9.9239 F5.0
G00 Z1.0
X14.4449Y-5.9833
Z0.1
G01 Z-0.13 F2.5
X14.383 Y-6.072 F5.0
G03X14.371 Y-6.1796 I0.2059 J-0.0775 F2.5
X14.371 Y-6.1796 I0.4111 J0.0566
X14.381 Y-6.2295 I0.4111 J0.0566
X14.4336 Y-6.324 I0.2126 J0.0565
G01 X14.525 Y-6.382 F5.0
G00 Z1.0
X15.5012Y-2.0408
Z0.1
G01 Z-0.13 F2.5
X15.4645 Y-2.1425 F5.0
G03X15.4807 Y-2.2495 I0.2189 J-0.0216 F2.5
X15.4807 Y-2.2495 I0.3825 J0.1611
X15.5033 Y-2.2951 I0.3825 J0.1611
X15.5786 Y-2.3728 I0.1908 J0.1096
G01 X15.6818 Y-2.4052 F5.0
G00 Z1.0
M09
G28 G49 G91 Y0.
G53 G90 Z0.
M01

N436 ()
( TOOL: T8 = 0.875 dia. TD_08750_7|8:T )
T8 M6
G00 G90 G56 X0. Y0.
S218 M03
X0 Y0
X0. Y0.
G43 H8 Z1.0 M8
Z0.04
G83 R0.04 Z-2.4529 Q0.875 F0.9
G80
Z1.0
M09
G28 G49 G91 Y0.
G53 G90 Z0.
M01

N452 ()
( TOOL: T9 = 0.5 dia. .5 carbide end mill )
T9 M6
G00 G90 G56 X0. Y0.
S2292 M03
X0 Y0
X0.0255 Y0.
G43 H9 Z1.0 M8
Z0.1
G01 Z-0.06 F9.2
G03X-0.141 Y0. I-0.0832 J0. F18.3
X-0.0846 Y0.1128 I0.141 J0.
G02X-0.2224 Y0.0394 I-0.3058 J0.4079
G03X-0.2903 Y-0.1013 I0.0364 J-0.1043
X-0.2971 Y0.0792 I0.2903 J0.1013
X-0.3259 Y-0.2182 I0.8838 J-0.2356
X-0.1407 Y-0.4526 I0.2636 J0.0178
X-0.3969 Y-0.2592 I0.1407 J0.4526
G02X-0.3035 Y-0.4676 I-0.6099 J-0.3983
G03X-0.1383 Y-0.6254 I0.2128 J0.0574
X-0.3625 Y-0.5281 I0.1383 J0.6254
G02X-0.2287 Y-0.6868 I-0.2211 J-0.3221
G03X-0.0581 Y-0.8049 I0.1853 J0.0853
X-0.4567 Y-0.6653 I0.0581 J0.8049
G02X-0.3386 Y-0.8234 I-0.1736 J-0.2528
G03X-0.1912 Y-0.9545 I0.1858 J0.0604
X-0.5509 Y-0.8026 I0.1912 J0.9545
G02X-0.4422 Y-0.9598 I-0.1519 J-0.2213
G03X-0.3093 Y-1.0972 I0.1844 J0.0454
X-0.3093 Y-1.0972 I0.3093 J1.0972
G00 Z1.0
M09
G28 G49 G91 Y0.
G53 G90 Z0.
M01

N487 ()
( TOOL: T10 = 1.0 dia. csink90:1000 )
T10 M6
G00 G90 G56 X0. Y0.
S600 M03
X0 Y0
X-0.35 Y0.
G43 H10 Z1.0 M8
Z0.04
G01 Z-0.19 F2.5
X-0.3854 Y-0.0222 F5.0
G03X-0.395 Y-0.0629 I0.0447 J-0.032 F2.5
X-0.395 Y-0.0629 I0.395 J0.0629 F4.0
X-0.3747 Y-0.1401 I0.395 J0.0629
X-0.3463 Y-0.1707 I0.0515 J0.0193 F2.5
G01 X-0.3045 Y-0.1726 F5.0
G00 Z1.0
M09
G28 G49 G91 Y0.
G53 G90 Z0.
M01

N508 ()
( TOOL: T11 = 1.0 dia. tap1-8UNC:SP )
T11 M6
G00 G90 G56 X0. Y0.
S100 M03
X0 Y0
X0. Y0.
G43 H11 Z1.0 M8
Z0.04
G84 R0.04 Z-2.19 F5.0
G80
Z1.0
M09
M89
G28 G91 M05 Y0.
G28 Z0.
M30
%

_________________
CHOCOLATE? This is doo doo baby!


Top
 Profile  
 
 Post subject: Re: Tool list in post
PostPosted: Wed Jul 03, 2013 5:16 pm 
Offline

Joined: Fri Sep 16, 2011 5:48 pm
Posts: 98
Location: S.F. Bay Area
it's posting the line number, so N26 is on the 26th line. I'll look to see if there's a better way...


Top
 Profile  
 
 Post subject: Re: Tool list in post
PostPosted: Wed Jul 03, 2013 5:55 pm 
Offline

Joined: Fri Sep 16, 2011 5:48 pm
Posts: 98
Location: S.F. Bay Area
I found this in the help under mill posts in xbuild...It'll do just what you want. Good info too, thanks for asking:

Fanuc line numbering
Many Fanuc control users do not want line numbers, except they want to sequentially number the tool changes.

You can do this with the following steps:

Either remove all the occurrences of N<SEQ> in the post, or make sure that all occurrences are modal and set the Block Increment in FeatureCAM to 0.
Use the following line as the tool change in the Start format. This line sets a variable, tc, to 1 and outputs it in the format for <SEQ>:
N[<SEQ>:tc=1] T<TOOL> M6 ( TOOL <TOOL> [uppercase(<TOOL-NAME>)] )<EOB>

Use the following line as the tool change in the Tool Change format:
N[<SEQ>:tc=tc+1] T<TOOL> M6 ( TOOL <TOOL> [uppercase(<TOOL-NAME>)] )<EOB>





edit: formatting


Top
 Profile  
 
 Post subject: Re: Tool list in post
PostPosted: Wed Jul 03, 2013 6:29 pm 
Offline

Joined: Thu Jun 20, 2013 7:02 pm
Posts: 120
Location: Houston Tx
It works awesome
but it puts my program number right in the same line , %o100
like that
and sets my tool list right on top of my tool info for the first tool, how can i separate them and give a line of space
ive tried entering nothing then <EOB> but it ignores it

WOOPS i wasnt saving it in xbuild

got it all just how I like it
neat and easy to read

%
O0100
(PART NUMBER)
( T1 = 2.344 DR )
( T2 = 2.38 DIA BORING HEAD )
( T3 = CENTER_5 )
( T4 = TD_01990_8:J )
( T5 = TAP1|4-20UNC:H5:SB )
( T6 = TD_16250_1_5|8:T:TN )
( T7 = 45 DEGREE CUTTER )
( T8 = TD_08750_7|8:T )
( T9 = .5 CARBIDE END MILL )
( T10 = CSINK90:1000 )
( T11 = TAP1-8UNC:SP )
N1
( TOOL: T1 = 2.344 dia. 2.344 DR )
T1 M6
G00 G90 G54 X0. Y0.
S601 M03
G43 H1 Z1.0 M8
G00 X22.125 Y0.
G81 R-0.4 Z-5.05 F2.4
X20.7907 Y7.5672
X16.9487 Y14.2217
X11.0625 Y19.1608
X3.842 Y21.7889
X-3.842
X-11.0625 Y19.1608
X-16.9487 Y14.2217
X-20.7907 Y7.5672
X-22.125 Y0.
X-20.7907 Y-7.5672
X-16.9487 Y-14.2217
X-11.0625 Y-19.1608
X-3.842 Y-21.7889
X3.842
X11.0625 Y-19.1608
X16.9487 Y-14.2217
X20.7907 Y-7.5672
G80
G00 Z1.0
M09
G28 G49 G91 Y0.
G53 G90 Z0.
M01

N2
( TOOL: T2 = 2.38 dia. 2.38 DIA BORING HEAD )
T2 M6
G00 G90 G54 X0. Y0.
S400 M03
X0 Y0
X22.125 Y0.
G43 H2 Z1.0 M8
G85 R-0.4 Z-5.05 F1.0
X20.7907 Y7.5672
X16.9487 Y14.2217
X11.0625 Y19.1608
X3.842 Y21.7889
X-3.842
X-11.0625 Y19.1608
X-16.9487 Y14.2217
X-20.7907 Y7.5672
X-22.125 Y0.
X-20.7907 Y-7.5672
X-16.9487 Y-14.2217
X-11.0625 Y-19.1608
X-3.842 Y-21.7889
X3.842
X11.0625 Y-19.1608
X16.9487 Y-14.2217
X20.7907 Y-7.5672
G80
G00 Z1.0
M09
G28 G49 G91 Y0.
G53 G90 Z0.
M01

N3
( TOOL: T3 = 0.1875 dia. center_5 )
T3 M6
G00 G90 G54 X0. Y0.
S600 M03
X0 Y0
X14.315 Y0.
G43 H3 Z1.0 M8
G81 R-4.508 Z-4.8796 F5.0
X12.3972 Y7.1575
X7.1575 Y12.3972
X0. Y14.315
X-7.1575 Y12.3972
X-12.3972 Y7.1575
X-14.315 Y0.
X-12.3972 Y-7.1575
X-7.1575 Y-12.3972
X0. Y-14.315
X7.1575 Y-12.3972
X12.3972 Y-7.1575
G80
G00 Z1.0
M09
G28 G49 G91 Y0.
G53 G90 Z0.
M01

N4
( TOOL: T4 = 0.199 dia. TD_01990_8:J )
T4 M6
G00 G90 G54 X0. Y0.
S959 M03
X0 Y0
X14.315 Y0.
G43 H4 Z1.0 M8
G83 R-4.508 Z-5.5478 Q0.199 F3.8
X12.3972 Y7.1575
X7.1575 Y12.3972
X0. Y14.315
X-7.1575 Y12.3972
X-12.3972 Y7.1575
X-14.315 Y0.
X-12.3972 Y-7.1575
X-7.1575 Y-12.3972
X0. Y-14.315
X7.1575 Y-12.3972
X12.3972 Y-7.1575
G80
G00 Z1.0
M09
G28 G49 G91 Y0.
G53 G90 Z0.
M01

N5
( TOOL: T5 = 0.25 dia. tap1|4-20UNC:H5:SB )
T5 M6
G00 G90 G54 X0. Y0.
S100 M03
X0 Y0
X14.315 Y0.
G43 H5 Z1.0 M8
G84 R-4.508 Z-5.3255 F5.0
X12.3972 Y7.1575
X7.1575 Y12.3972
X0. Y14.315
X-7.1575 Y12.3972
X-12.3972 Y7.1575
X-14.315 Y0.
X-12.3972 Y-7.1575
X-7.1575 Y-12.3972
X0. Y-14.315
X7.1575 Y-12.3972
X12.3972 Y-7.1575
G80
G00 Z1.0
M09
G28 G49 G91 Y0.
G53 G90 Z0.
M01

N6
( TOOL: T6 = 1.625 dia. TD_16250_1_5|8:T:TN )
T6 M6
G00 G90 G55 X0. Y0.
S1171 M03
X0 Y0
X15.8631 Y2.0884
G43 H6 Z1.0 M8
G81 R0.1 Z-3.3882 F4.7
X14.7821 Y6.1229
X12.6937 Y9.7402
X9.7402 Y12.6937
X6.1229 Y14.7821
X2.0884 Y15.8631
X-2.0884
X-6.1229 Y14.7821
X-9.7402 Y12.6937
X-12.6937 Y9.7402
X-14.7821 Y6.1229
X-15.8631 Y2.0884
Y-2.0884
X-14.7821 Y-6.1229
X-12.6937 Y-9.7402
X-9.7402 Y-12.6937
X-6.1229 Y-14.7821
X-2.0884 Y-15.8631
X2.0884
X6.1229 Y-14.7821
X9.7402 Y-12.6937
X12.6937 Y-9.7402
X14.7821 Y-6.1229
X15.8631 Y-2.0884
G80
G00 Z1.0
M09
G28 G49 G91 Y0.
G53 G90 Z0.
M01

N7
( TOOL: T7 = 1.4 dia. 45 DEGREE CUTTER )
T7 M6
G00 G90 G55 X0. Y0.
S600 M03
X0 Y0
X15.5012 Y2.0408
G43 H7 Z1.0 M8
Z0.1
G01 Z-0.13 F2.5
X15.4921 Y1.933 F5.0
G03X15.5354 Y1.8338 I0.2171 J0.0358 F2.5
X15.5354 Y1.8338 I0.3277 J0.2546
X15.569 Y1.7956 I0.3277 J0.2546
X15.6619 Y1.7401 I0.1559 J0.1552
G01 X15.77 Y1.7355 F5.0
G00 Z1.0
X14.4449Y5.9833
Z0.1
G01 Z-0.13 F2.5
X14.4639 Y5.8767 F5.0
G03X14.5314 Y5.7922 I0.2004 J0.0908 F2.5
X14.5314 Y5.7922 I0.2507 J0.3307
X14.5738 Y5.764 I0.2507 J0.3307
X14.6778 Y5.7344 I0.1104 J0.1903
G01 X14.7835 Y5.7579 F5.0
G00 Z1.0
X12.4041Y9.518
Z0.1
G01 Z-0.13 F2.5
X12.45 Y9.42 F5.0
G03X12.5371 Y9.3558 I0.1701 J0.1396 F2.5
X12.5371 Y9.3558 I0.1565 J0.3844
X12.5854 Y9.3396 I0.1565 J0.3844
X12.6935 Y9.3379 I0.0574 J0.2124
G01 X12.7895 Y9.388 F5.0
G00 Z1.0
X9.518Y12.4041
Z0.1
G01 Z-0.13 F2.5
X9.5877 Y12.3214 F5.0
G03X9.6885 Y12.2819 I0.1282 J0.1788 F2.5
X9.6885 Y12.2819 I0.0517 J0.4118
X9.7393 Y12.2787 I0.0517 J0.4118
X9.8442 Y12.305 I0.0005 J0.22
G01 X9.9239 Y12.3782 F5.0
G00 Z1.0
X5.9833Y14.4449
Z0.1
G01 Z-0.13 F2.5
X6.072 Y14.383 F5.0
G03X6.1796 Y14.371 I0.0775 J0.2059 F2.5
X6.1796 Y14.371 I-0.0566 J0.4111
X6.2295 Y14.381 I-0.0566 J0.4111
X6.324 Y14.4336 I-0.0565 J0.2126
G01 X6.382 Y14.525 F5.0
G00 Z1.0
X2.0408Y15.5012
Z0.1
G01 Z-0.13 F2.5
X2.1425 Y15.4645 F5.0
G03X2.2495 Y15.4807 I0.0216 J0.2189 F2.5
X2.2495 Y15.4807 I-0.1611 J0.3825
X2.2951 Y15.5033 I-0.1611 J0.3825
X2.3728 Y15.5786 I-0.1096 J0.1908
G01 X2.4052 Y15.6818 F5.0
G00 Z1.0
X-2.0408Y15.5012
Z0.1
G01 Z-0.13 F2.5
X-1.933 Y15.4921 F5.0
G03X-1.8338 Y15.5354 I-0.0358 J0.2171 F2.5
X-1.8338 Y15.5354 I-0.2546 J0.3277
X-1.7956 Y15.569 I-0.2546 J0.3277
X-1.7401 Y15.6619 I-0.1552 J0.1559
G01 X-1.7355 Y15.77 F5.0
G00 Z1.0
X-5.9833Y14.4449
Z0.1
G01 Z-0.13 F2.5
X-5.8767 Y14.4639 F5.0
G03X-5.7922 Y14.5314 I-0.0908 J0.2004 F2.5
X-5.7922 Y14.5314 I-0.3307 J0.2507
X-5.764 Y14.5738 I-0.3307 J0.2507
X-5.7344 Y14.6778 I-0.1903 J0.1104
G01 X-5.7579 Y14.7835 F5.0
G00 Z1.0
X-9.518Y12.4041
Z0.1
G01 Z-0.13 F2.5
X-9.42 Y12.45 F5.0
G03X-9.3558 Y12.5371 I-0.1396 J0.1701 F2.5
X-9.3558 Y12.5371 I-0.3844 J0.1565
X-9.3396 Y12.5854 I-0.3844 J0.1565
X-9.3379 Y12.6935 I-0.2124 J0.0574
G01 X-9.388 Y12.7895 F5.0
G00 Z1.0
X-12.4041Y9.518
Z0.1
G01 Z-0.13 F2.5
X-12.3214 Y9.5877 F5.0
G03X-12.2819 Y9.6885 I-0.1788 J0.1282 F2.5
X-12.2819 Y9.6885 I-0.4118 J0.0517
X-12.2787 Y9.7393 I-0.4118 J0.0517
X-12.305 Y9.8442 I-0.22 J0.0005
G01 X-12.3782 Y9.9239 F5.0
G00 Z1.0
X-14.4449Y5.9833
Z0.1
G01 Z-0.13 F2.5
X-14.383 Y6.072 F5.0
G03X-14.371 Y6.1796 I-0.2059 J0.0775 F2.5
X-14.371 Y6.1796 I-0.4111 J-0.0566
X-14.381 Y6.2295 I-0.4111 J-0.0566
X-14.4336 Y6.324 I-0.2126 J-0.0565
G01 X-14.525 Y6.382 F5.0
G00 Z1.0
X-15.5012Y2.0408
Z0.1
G01 Z-0.13 F2.5
X-15.4645 Y2.1425 F5.0
G03X-15.4807 Y2.2495 I-0.2189 J0.0216 F2.5
X-15.4807 Y2.2495 I-0.3825 J-0.1611
X-15.5033 Y2.2951 I-0.3825 J-0.1611
X-15.5786 Y2.3728 I-0.1908 J-0.1096
G01 X-15.6818 Y2.4052 F5.0
G00 Z1.0
X-15.5012Y-2.0408
Z0.1
G01 Z-0.13 F2.5
X-15.4921 Y-1.933 F5.0
G03X-15.5354 Y-1.8338 I-0.2171 J-0.0358 F2.5
X-15.5354 Y-1.8338 I-0.3277 J-0.2546
X-15.569 Y-1.7956 I-0.3277 J-0.2546
X-15.6619 Y-1.7401 I-0.1559 J-0.1552
G01 X-15.77 Y-1.7355 F5.0
G00 Z1.0
X-14.4449Y-5.9833
Z0.1
G01 Z-0.13 F2.5
X-14.4639 Y-5.8767 F5.0
G03X-14.5314 Y-5.7922 I-0.2004 J-0.0908 F2.5
X-14.5314 Y-5.7922 I-0.2507 J-0.3307
X-14.5738 Y-5.764 I-0.2507 J-0.3307
X-14.6778 Y-5.7344 I-0.1104 J-0.1903
G01 X-14.7835 Y-5.7579 F5.0
G00 Z1.0
X-12.4041Y-9.518
Z0.1
G01 Z-0.13 F2.5
X-12.45 Y-9.42 F5.0
G03X-12.5371 Y-9.3558 I-0.1701 J-0.1396 F2.5
X-12.5371 Y-9.3558 I-0.1565 J-0.3844
X-12.5854 Y-9.3396 I-0.1565 J-0.3844
X-12.6935 Y-9.3379 I-0.0574 J-0.2124
G01 X-12.7895 Y-9.388 F5.0
G00 Z1.0
X-9.518Y-12.4041
Z0.1
G01 Z-0.13 F2.5
X-9.5877 Y-12.3214 F5.0
G03X-9.6885 Y-12.2819 I-0.1282 J-0.1788 F2.5
X-9.6885 Y-12.2819 I-0.0517 J-0.4118
X-9.7393 Y-12.2787 I-0.0517 J-0.4118
X-9.8442 Y-12.305 I-0.0005 J-0.22
G01 X-9.9239 Y-12.3782 F5.0
G00 Z1.0
X-5.9833Y-14.4449
Z0.1
G01 Z-0.13 F2.5
X-6.072 Y-14.383 F5.0
G03X-6.1796 Y-14.371 I-0.0775 J-0.2059 F2.5
X-6.1796 Y-14.371 I0.0566 J-0.4111
X-6.2295 Y-14.381 I0.0566 J-0.4111
X-6.324 Y-14.4336 I0.0565 J-0.2126
G01 X-6.382 Y-14.525 F5.0
G00 Z1.0
X-2.0408Y-15.5012
Z0.1
G01 Z-0.13 F2.5
X-2.1425 Y-15.4645 F5.0
G03X-2.2495 Y-15.4807 I-0.0216 J-0.2189 F2.5
X-2.2495 Y-15.4807 I0.1611 J-0.3825
X-2.2951 Y-15.5033 I0.1611 J-0.3825
X-2.3728 Y-15.5786 I0.1096 J-0.1908
G01 X-2.4052 Y-15.6818 F5.0
G00 Z1.0
X2.0408Y-15.5012
Z0.1
G01 Z-0.13 F2.5
X1.933 Y-15.4921 F5.0
G03X1.8338 Y-15.5354 I0.0358 J-0.2171 F2.5
X1.8338 Y-15.5354 I0.2546 J-0.3277
X1.7956 Y-15.569 I0.2546 J-0.3277
X1.7401 Y-15.6619 I0.1552 J-0.1559
G01 X1.7355 Y-15.77 F5.0
G00 Z1.0
X5.9833Y-14.4449
Z0.1
G01 Z-0.13 F2.5
X5.8767 Y-14.4639 F5.0
G03X5.7922 Y-14.5314 I0.0908 J-0.2004 F2.5
X5.7922 Y-14.5314 I0.3307 J-0.2507
X5.764 Y-14.5738 I0.3307 J-0.2507
X5.7344 Y-14.6778 I0.1903 J-0.1104
G01 X5.7579 Y-14.7835 F5.0
G00 Z1.0
X9.518Y-12.4041
Z0.1
G01 Z-0.13 F2.5
X9.42 Y-12.45 F5.0
G03X9.3558 Y-12.5371 I0.1396 J-0.1701 F2.5
X9.3558 Y-12.5371 I0.3844 J-0.1565
X9.3396 Y-12.5854 I0.3844 J-0.1565
X9.3379 Y-12.6935 I0.2124 J-0.0574
G01 X9.388 Y-12.7895 F5.0
G00 Z1.0
X12.4041Y-9.518
Z0.1
G01 Z-0.13 F2.5
X12.3214 Y-9.5877 F5.0
G03X12.2819 Y-9.6885 I0.1788 J-0.1282 F2.5
X12.2819 Y-9.6885 I0.4118 J-0.0517
X12.2787 Y-9.7393 I0.4118 J-0.0517
X12.305 Y-9.8442 I0.22 J-0.0005
G01 X12.3782 Y-9.9239 F5.0
G00 Z1.0
X14.4449Y-5.9833
Z0.1
G01 Z-0.13 F2.5
X14.383 Y-6.072 F5.0
G03X14.371 Y-6.1796 I0.2059 J-0.0775 F2.5
X14.371 Y-6.1796 I0.4111 J0.0566
X14.381 Y-6.2295 I0.4111 J0.0566
X14.4336 Y-6.324 I0.2126 J0.0565
G01 X14.525 Y-6.382 F5.0
G00 Z1.0
X15.5012Y-2.0408
Z0.1
G01 Z-0.13 F2.5
X15.4645 Y-2.1425 F5.0
G03X15.4807 Y-2.2495 I0.2189 J-0.0216 F2.5
X15.4807 Y-2.2495 I0.3825 J0.1611
X15.5033 Y-2.2951 I0.3825 J0.1611
X15.5786 Y-2.3728 I0.1908 J0.1096
G01 X15.6818 Y-2.4052 F5.0
G00 Z1.0
M09
G28 G49 G91 Y0.
G53 G90 Z0.
M01

N8
( TOOL: T8 = 0.875 dia. TD_08750_7|8:T )
T8 M6
G00 G90 G56 X0. Y0.
S218 M03
X0 Y0
X0. Y0.
G43 H8 Z1.0 M8
Z0.04
G83 R0.04 Z-2.4529 Q0.875 F0.9
G80
Z1.0
M09
G28 G49 G91 Y0.
G53 G90 Z0.
M01

N9
( TOOL: T9 = 0.5 dia. .5 carbide end mill )
T9 M6
G00 G90 G56 X0. Y0.
S2292 M03
X0 Y0
X0.0255 Y0.
G43 H9 Z1.0 M8
Z0.1
G01 Z-0.06 F9.2
G03X-0.141 Y0. I-0.0832 J0. F18.3
X-0.0846 Y0.1128 I0.141 J0.
G02X-0.2224 Y0.0394 I-0.3058 J0.4079
G03X-0.2903 Y-0.1013 I0.0364 J-0.1043
X-0.2971 Y0.0792 I0.2903 J0.1013
X-0.3259 Y-0.2182 I0.8838 J-0.2356
X-0.1407 Y-0.4526 I0.2636 J0.0178
X-0.3969 Y-0.2592 I0.1407 J0.4526
G02X-0.3035 Y-0.4676 I-0.6099 J-0.3983
G03X-0.1383 Y-0.6254 I0.2128 J0.0574
X-0.3625 Y-0.5281 I0.1383 J0.6254
G02X-0.2287 Y-0.6868 I-0.2211 J-0.3221
G03X-0.0581 Y-0.8049 I0.1853 J0.0853
X-0.4567 Y-0.6653 I0.0581 J0.8049
G02X-0.3386 Y-0.8234 I-0.1736 J-0.2528
G03X-0.1912 Y-0.9545 I0.1858 J0.0604
X-0.5509 Y-0.8026 I0.1912 J0.9545
G02X-0.4422 Y-0.9598 I-0.1519 J-0.2213
G03X-0.3093 Y-1.0972 I0.1844 J0.0454
X-0.3093 Y-1.0972 I0.3093 J1.0972
G00 Z1.0
M09
G28 G49 G91 Y0.
G53 G90 Z0.
M01

N10
( TOOL: T10 = 1.0 dia. csink90:1000 )
T10 M6
G00 G90 G56 X0. Y0.
S600 M03
X0 Y0
X-0.35 Y0.
G43 H10 Z1.0 M8
Z0.04
G01 Z-0.19 F2.5
X-0.3854 Y-0.0222 F5.0
G03X-0.395 Y-0.0629 I0.0447 J-0.032 F2.5
X-0.395 Y-0.0629 I0.395 J0.0629 F4.0
X-0.3747 Y-0.1401 I0.395 J0.0629
X-0.3463 Y-0.1707 I0.0515 J0.0193 F2.5
G01 X-0.3045 Y-0.1726 F5.0
G00 Z1.0
M09
G28 G49 G91 Y0.
G53 G90 Z0.
M01

N11
( TOOL: T11 = 1.0 dia. tap1-8UNC:SP )
T11 M6
G00 G90 G56 X0. Y0.
S100 M03
X0 Y0
X0. Y0.
G43 H11 Z1.0 M8
Z0.04
G84 R0.04 Z-2.19 F5.0
G80
Z1.0
M09
M89
G28 G91 M05 Y0.
G28 Z0.
M30
%

_________________
CHOCOLATE? This is doo doo baby!


Top
 Profile  
 
Display posts from previous:  Sort by  
Forum locked This topic is locked, you cannot edit posts or make further replies.  [ 22 posts ]  Go to page 1, 2  Next

All times are UTC


Who is online

Users browsing this forum: No registered users and 6 guests


You cannot post new topics in this forum
You cannot reply to topics in this forum
You cannot edit your posts in this forum
You cannot delete your posts in this forum
You cannot post attachments in this forum

Search for:
Jump to:  
Powered by phpBB