Site Logo
Site Logo
 
It is currently Sun Apr 02, 2017 6:58 pm

All times are UTC [ DST ]




Forum locked This topic is locked, you cannot edit posts or make further replies.  [ 7 posts ] 
Author Message
 Post subject: Moldbase Wizard
PostPosted: Thu Dec 16, 2010 5:28 pm 
Offline
DELCAM Guru
DELCAM Guru
User avatar

Joined: Fri Oct 08, 2004 8:19 am
Posts: 445
Location: Basildon, Essex, UK
Hi,

When using the insert extra plate options in the moldbase wizard PS only seems to allow using a Generic plate, this is very unhelpful as most of the time the extra plates I want to add will be standard plates from the same catalogue as the rest of the tool.

E.g. If using HASCO catalogue then I would like to be able to add extra HASCO plates K20 or K30 etc. into the tool, instead of the generic ones.

Also in the HASCO catalogue not all of the location rings that are available are in the PS Catalogue. Can the other sizes be added please as it is so frustrating having to create a 'user defined' locating ring with dims which are actually standard.

PS Any news on the weird disappearing parameter problem I posted about earlier this month.

Cheers,

Jim


Top
 Profile  
 
 Post subject: Re: Moldbase Wizard
PostPosted: Fri Feb 04, 2011 4:48 pm 
Offline
DELCAM Guru
DELCAM Guru
User avatar

Joined: Fri Oct 08, 2004 8:19 am
Posts: 445
Location: Basildon, Essex, UK
I don't think many people are reading this are they...


Top
 Profile  
 
 Post subject: Re: Moldbase Wizard
PostPosted: Wed Feb 09, 2011 2:05 pm 
Offline
Site Admin
User avatar

Joined: Wed Sep 29, 2004 9:44 am
Posts: 2631
Location: Birmingham
Sorry, Jim. That's the problem with the Moldmaker section being too far down my screen. I'll ping development for you.


Top
 Profile  
 
 Post subject: Re: Moldbase Wizard
PostPosted: Thu Feb 10, 2011 9:05 am 
Offline
DELCAM Staff
DELCAM Staff
User avatar

Joined: Fri Mar 03, 2006 1:51 pm
Posts: 42
Location: UK
Hi Jim, you're right, Moldbase Wizard currently allows you to add additional plain plates. The idea is this gives users ultimate flexibility and they can add the relevant holes etc using Power Features. I've opened a wish (moldmakerwish#1380) to allow users to add standard plates too.

Could you post an example of the dimensions that are missing for HASCO location rings please?

Thanks.
Ian


Top
 Profile  
 
 Post subject: Re: Moldbase Wizard
PostPosted: Thu Feb 10, 2011 11:44 am 
Offline
DELCAM Guru
DELCAM Guru
User avatar

Joined: Fri Oct 08, 2004 8:19 am
Posts: 445
Location: Basildon, Essex, UK
Hi Ian,

Heres a list of the Hasco Rings K100 that are missing:

    Order No. d1 [mm] h1 [mm] t1  [mm] h2 [mm] d2  [mm] Typ
    K100 / 60X 11    60 11 3 7 26 1
    K100 / 60X 13    60 13 5 9 26 1
    K100 / 80X 11    80 11 3 7 26 1
    K100 / 80X 13    80 13 5 9 26 1
    K100 / 90X 11    90 11 3 - 36 2
    K100 / 90X 13    90 13 5 - 36 2
    K100 / 90X 15    90 15 7 - 36 2
    K100 / 90X 16,5    90 16,5 8,5 - 36 2
    K100 / 100X 11    100 11 3 7 36 3
    K100 / 100X 13    100 13 5 9 36 3
    K100 / 100X 15    100 15 7 11 36 3
    K100 / 100X 16,5    100 16,5 8,5 12,5 36 3
    K100 / 110X 11    110 11 3 7 36 3
    K100 / 110X 13    110 13 5 9 36 3
    K100 / 110X 15    110 15 7 11 36 3
    K100 / 110X 16,5    110 16,5 8,5 12,5 36 3
    K100 / 120X 11    120 11 3 7 36 3
    K100 / 120X 13    120 13 5 9 36 3
    K100 / 120X 15    120 15 7 11 36 3
    K100 / 120X 16,5    120 16,5 8,5 12,5 36 3
    K100 / 125X 11    125 11 3 7 36 3
    K100 / 125X 13    125 13 5 9 36 3
    K100 / 125X 15    125 15 7 11 36 3
    K100 / 125X 16,5    125 16,5 8,5 12,5 36 3
    K100 / 160X 11    160 11 3 7 36 3
    K100 / 160X 13    160 13 5 9 36 3
    K100 / 160X 15    160 15 7 11 36 3
    K100 / 160X 16,5    160 16,5 8,5 12,5 36 3
    K100 / 175X 11    175 11 3 7 36 3
    K100 / 175X 13    175 13 5 9 36 3
    K100 / 175X 15    175 15 7 11 36 3
    K100 / 175X 16,5    175 16,5 8,5 12,5 36 3

Regards,

Jim


Top
 Profile  
 
 Post subject: Re: Moldbase Wizard
PostPosted: Thu Feb 10, 2011 11:46 am 
Offline
DELCAM Guru
DELCAM Guru
User avatar

Joined: Fri Oct 08, 2004 8:19 am
Posts: 445
Location: Basildon, Essex, UK
And here are the K500s which are missing.

    Order No. d1 [mm] h1 [mm] t1 [mm] h2 [mm] Typ material No.
    K500 / 60X 11    60 11 3 7 3 234370
    K500 / 60X 13    60 13 5 9 5 234389
    K500 / 80X 11    80 11 3 7 3 234397
    K500 / 80X 13    80 13 5 9 5 234400
    K500 / 100X 11    100 11 3 7 3 160040
    K500 / 100X 13    100 13 5 9 5 159840
    K500 / 100X 15    100 15 7 11 7 172405
    K500 / 100X 16,5    100 16,5 8,5 12,5 8.5 172391
    K500 / 110X 11    110 11 3 7 3 25313
    K500 / 110X 13    110 13 5 9 5 25321
    K500 / 110X 15    110 15 7 11 7 172375
    K500 / 110X 16,5    110 16,5 8,5 12,5 8.5 172367
    K500 / 120X 11    120 11 3 7 3 25348
    K500 / 120X 13    120 13 5 9 5 25356
    K500 / 120X 15    120 15 7 11 7 172340
    K500 / 120X 16,5    120 16,5 8,5 12,5 8.5 172332
    K500 / 125X 11    125 11 3 7 3 172324
    K500 / 125X 13    125 13 5 9 5 172308
    K500 / 125X 15    125 15 7 11 7 25372
    K500 / 125X 16,5    125 16,5 8,5 12,5 8.5 25380
    K500 / 160X 11    160 11 3 7 3 172294
    K500 / 160X 13    160 13 5 9 5 172286
    K500 / 160X 15    160 15 7 11 7 156167
    K500 / 160X 16,5    160 16,5 8,5 12,5 8.5 172278
    K500 / 175X 11    175 11 3 7 3 172260
    K500 / 175X 13    175 13 5 9 5 172251
    K500 / 175X 15    175 15 7 11 7 25437
    K500 / 175X 16,5    175 16,5 8,5 12,5 8.5 25445


Regards,
Jim


Top
 Profile  
 
 Post subject: Re: Moldbase Wizard
PostPosted: Thu Feb 10, 2011 12:37 pm 
Offline
DELCAM Staff
DELCAM Staff
User avatar

Joined: Fri Mar 03, 2006 1:51 pm
Posts: 42
Location: UK
Thanks, we will get them added (moldmakerwish#1382).

Regards,
Ian


Top
 Profile  
 
Display posts from previous:  Sort by  
Forum locked This topic is locked, you cannot edit posts or make further replies.  [ 7 posts ] 

All times are UTC [ DST ]


Who is online

Users browsing this forum: No registered users and 1 guest


You cannot post new topics in this forum
You cannot reply to topics in this forum
You cannot edit your posts in this forum
You cannot delete your posts in this forum
You cannot post attachments in this forum

Search for:
Jump to:  
cron
Powered by phpBB